DK-09 Series (Black Load / Capacity 1100 kgf) Heavy-Duty Anti-Vibration Leveling Feet
Category: Heavy-Duty Anti-Vibration Leveling Feet
Specifications
Details

Heavy Duty Leveling Machine Feet|Before the installation, the mechanical foot please do not tapped hole.
- Automatic adjust the horizontal angle. Correctly guide the machine feet to completely fit the ground to let the mechanical stable running. When machine loading on the heavy-duty leveling feet can use open-end wrench to adjust the machine height & horizon. (please refer to photo below)
- To prevent from the vibration and improve the work environment when the machine is on. To decrease the vibration between floors when the machine is running. To ensure the precision of machinery in order to prevent from the slipping out, shockproof, non-slip, wear-resistant, oil-resistant.
- Application: Gantry, injection machine and industrial processing equipment.
- Material-Base: FC-250 Powder coating (Silver)
- Material-Bolt: S45C with heat treatment and coating with Manganese phosphate
- Material-Cushion: Chloroprene Rubber (Black)
- Material-Socket Set Nut: FCD45 Powder coating (Silver)
Item No. | Type | Bolt Material / Finish | Base Material / Finish | Dimensions | Max. Thickness of Machine Support | Load Capacity (kgf) |
Weight (kg) |
||||
Size of Screw (M) |
Bolt length (L) |
H | H1 | Base DIA (D) |
|||||||
With socket set nut | S45C / Manganese phosphate | FC-250 / Powder coating (Black) | M48*P2.0 | 110 | 161 | 75 | 150 | 55 | 1100 | 3.8 | |
With socket set nut | S45C / Manganese phosphate | FC-250 / Powder coating (Black) | M48*P2.0 | 200 | 251 | 75 | 150 | 145 | 1100 | 3.9 | |
Without socket set nut | S45C / Manganese phosphate | FC-250 / Powder coating (Black) | M48*P2.0 | 110 | 151 | 65 | 150 | 55 | 1100 | 3.6 | |
Without socket set nut | S45C / Manganese phosphate | FC-250 / Powder coating (Black) | M48*P2.0 | 200 | 241 | 65 | 150 | 145 | 1100 | 3.7 |
.jpg)
.jpg)

※Place the level washer on the glide then lower down machine slowly. (Before the installation, the mechanical foot please do not tapped hole.)
※Insert the bolt through the machine into the glide then place the nut and washer from the top.
※To adjust machine to its height with the handle by the wrench(26mm).
※To tie the nut and washer when the adjustment is done accurately.
※After locking the socket set nut that is under handle with 3" hook wrench, assembly is finished.
.png)
View more about DK-09 Series (Black Load / Capacity 1100 kgf) Heavy-Duty Anti-Vibration Leveling Feet on main site